[PATCH v7 0/6] crypto/uadk: introduce uadk crypto driver

List overview All Threads
Download

newer

older

[PATCH v4 0/6] uadk - add...

[PATCH v6 0/6] crypto/uadk:...

Zhangfei Gao

27 Oct 2022 27 Oct '22

11:24 a.m.

Introduce a new crypto PMD for hardware accelerators based on UADK [1].

UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability.

[1] https://github.com/Linaro/uadk

Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit

Update in v7: 05: fix key_size of SHA384 HMAC

Update in v6: Akhil helped review the v5, and address all the comments from Akhil 01: add rel_notes info, update uadk.rst, put struct in header, etc. 02: move struct to header 04: move struct to header, remove RTE_CRYPTODEV_FF_SYM_SESSIONLESS 05: fixed key_size in HMAC mode 06: updated app/test/meson.build and uadk.rst in the mean time.

Update in v5 Patch 1 fix the build issue when uadk is installed to specific folder And update doc accordingly

Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device.

Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework".

Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes.

Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, };

Update in v1, compared with rfc

Suggested from Akhil Goyal gakhil@marvell.com Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini

Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: support uadk PMD

MAINTAINERS | 6 + app/test/meson.build | 1 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 + doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 96 ++ doc/guides/rel_notes/release_22_11.rst | 6 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1081 +++++++++++++++++ drivers/crypto/uadk/uadk_crypto_pmd_private.h | 79 ++ drivers/crypto/uadk/version.map | 3 + 13 files changed, 1367 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd_private.h create mode 100644 drivers/crypto/uadk/version.map

-- 2.25.1

Show replies by thread

Zhangfei Gao

27 Oct 27 Oct

11:25 a.m.

New subject: [PATCH v7 1/6] crypto/uadk: introduce uadk crypto driver

Introduce a new crypto PMD for hardware accelerators based on UADK [1].

This patch adds the basic framework.

[1] https://github.com/Linaro/uadk

Signed-off-by: Zhangfei Gao zhangfei.gao@linaro.org --- MAINTAINERS | 6 + doc/guides/cryptodevs/features/uadk.ini | 33 ++++++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 72 ++++++++++++ doc/guides/rel_notes/release_22_11.rst | 6 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 +++++ drivers/crypto/uadk/uadk_crypto_pmd.c | 110 ++++++++++++++++++ drivers/crypto/uadk/uadk_crypto_pmd_private.h | 25 ++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 287 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd_private.h create mode 100644 drivers/crypto/uadk/version.map

diff --git a/MAINTAINERS b/MAINTAINERS index 6f56111323..bf9baa9070 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1060,6 +1060,12 @@ M: Kai Ji kai.ji@intel.com F: drivers/crypto/scheduler/ F: doc/guides/cryptodevs/scheduler.rst

+HiSilicon UADK crypto +M: Zhangfei Gao zhangfei.gao@linaro.org +F: drivers/crypto/uadk/ +F: doc/guides/cryptodevs/uadk.rst +F: doc/guides/cryptodevs/features/uadk.ini + Intel QuickAssist M: Kai Ji kai.ji@intel.com F: drivers/crypto/qat/ diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini new file mode 100644 index 0000000000..df5ad40e3d --- /dev/null +++ b/doc/guides/cryptodevs/features/uadk.ini @@ -0,0 +1,33 @@ +; +; Supported features of the 'uadk' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +HW Accelerated = Y + +; +; Supported crypto algorithms of the 'uadk' crypto driver. +; +[Cipher] + +; +; Supported authentication algorithms of the 'uadk' crypto driver. +; +[Auth] + +; +; Supported AEAD algorithms of the 'uadk' crypto driver. +; +[AEAD] + +; +; Supported Asymmetric algorithms of the 'uadk' crypto driver. +; +[Asymmetric] + +; +; Supported Operating systems of the 'uadk' crypto driver. +; +[OS] +Linux = Y diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst index 39cca6dbde..cb4ce227e9 100644 --- a/doc/guides/cryptodevs/index.rst +++ b/doc/guides/cryptodevs/index.rst @@ -30,5 +30,6 @@ Crypto Device Drivers scheduler snow3g qat + uadk virtio zuc diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst new file mode 100644 index 0000000000..2a0cb300e9 --- /dev/null +++ b/doc/guides/cryptodevs/uadk.rst @@ -0,0 +1,72 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved. + Copyright 2022-2023 Linaro ltd. + +UADK Crypto Poll Mode Driver +============================ + +This code provides the initial implementation of the UADK poll mode +driver. All cryptographic operations are using UADK library crypto API, +which is algorithm level API, abstracting accelerators' low level +implementations. + +UADK crypto PMD relies on UADK library [1] + +UADK is a framework for user applications to access hardware accelerators. +UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share +the same page table between IOMMU and MMU. +As a result, user application can directly use virtual address for device DMA, +which enhances the performance as well as easy usability. + + +Features +-------- + +UADK crypto PMD has support for: + + +Test steps +---------- + + .. code-block:: console + + 1. Build UADK + $ git clone https://github.com/Linaro/uadk.git + $ cd uadk + $ mkdir build + $ ./autogen.sh + $ ./configure --prefix=$PWD/build + $ make + $ make install + + * Without --prefix, UADK will be installed to /usr/local/lib by default + * If get error:"cannot find -lnuma", please install the libnuma-dev + + 2. Run pkg-config libwd to ensure env is setup correctly + $ export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig + $ pkg-config libwd --cflags --libs + -I/usr/local/include -L/usr/local/lib -lwd + + * export PKG_CONFIG_PATH is required on demand, + not needed if UADK is installed to /usr/local/lib + + 3. Build DPDK + $ cd dpdk + $ mkdir build + $ meson build (--reconfigure) + $ cd build + $ ninja + $ sudo ninja install + + 4. Prepare hugepage for dpdk + $ echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages + $ echo 1024 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages + $ echo 1024 > /sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages + $ echo 1024 > /sys/devices/system/node/node3/hugepages/hugepages-2048kB/nr_hugepages + $ mkdir -p /mnt/huge_2mb + $ mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB + + 5. Run test app + + +[1] https://github.com/Linaro/uadk diff --git a/doc/guides/rel_notes/release_22_11.rst b/doc/guides/rel_notes/release_22_11.rst index 81cd66390d..6126031d2b 100644 --- a/doc/guides/rel_notes/release_22_11.rst +++ b/doc/guides/rel_notes/release_22_11.rst @@ -197,6 +197,12 @@ New Features integrated on SPR-EE. See the :doc:`../bbdevs/acc200` BBDEV guide for more details on this new driver.

+* **Added UADK crypto driver.** + + Added a new ``UADK`` crypto driver for the UADK library + See the + :doc:`../cryptodevs/uadk.rst` UADK guide for more details on this new driver. + * **Added eventdev adapter instance get API.**

* Added ``rte_event_eth_rx_adapter_instance_get`` to get Rx adapter diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index 147b8cf633..ee5377deff 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -18,6 +18,7 @@ drivers = [ 'octeontx', 'openssl', 'scheduler', + 'uadk', 'virtio', ]

diff --git a/drivers/crypto/uadk/meson.build b/drivers/crypto/uadk/meson.build new file mode 100644 index 0000000000..f6fae0a239 --- /dev/null +++ b/drivers/crypto/uadk/meson.build @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved. +# Copyright 2022-2023 Linaro ltd. + +if not is_linux + build = false + reason = 'only supported on Linux' + subdir_done() +endif + +sources = files( + 'uadk_crypto_pmd.c', +) + +deps += 'bus_vdev' +dep = dependency('libwd_crypto', required: false, method: 'pkg-config') +if not dep.found() + build = false + reason = 'missing dependency, "libwd_crypto"' +else + ext_deps += dep +endif + +dep = dependency('libwd', required: false, method: 'pkg-config') +if not dep.found() + build = false + reason = 'missing dependency, "libwd"' +else + ext_deps += dep +endif diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c new file mode 100644 index 0000000000..34df3ccbb9 --- /dev/null +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -0,0 +1,110 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved. + * Copyright 2022-2023 Linaro ltd. + */ + +#include <stdlib.h> + +#include <bus_vdev_driver.h> +#include <cryptodev_pmd.h> +#include <rte_bus_vdev.h> + +#include <uadk/wd_cipher.h> +#include <uadk/wd_digest.h> +#include <uadk/wd_sched.h> + +#include "uadk_crypto_pmd_private.h" + +static uint8_t uadk_cryptodev_driver_id; + +static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { + .dev_configure = NULL, + .dev_start = NULL, + .dev_stop = NULL, + .dev_close = NULL, + .stats_get = NULL, + .stats_reset = NULL, + .dev_infos_get = NULL, + .queue_pair_setup = NULL, + .queue_pair_release = NULL, + .sym_session_get_size = NULL, + .sym_session_configure = NULL, + .sym_session_clear = NULL, +}; + +static int +uadk_cryptodev_probe(struct rte_vdev_device *vdev) +{ + struct rte_cryptodev_pmd_init_params init_params = { + .name = "", + .private_data_size = sizeof(struct uadk_crypto_priv), + .max_nb_queue_pairs = + RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS, + }; + enum uadk_crypto_version version = UADK_CRYPTO_V2; + struct uadk_crypto_priv *priv; + struct rte_cryptodev *dev; + struct uacce_dev *udev; + const char *name; + + udev = wd_get_accel_dev("cipher"); + if (!udev) + return -ENODEV; + + if (!strcmp(udev->api, "hisi_qm_v2")) + version = UADK_CRYPTO_V2; + + free(udev); + + name = rte_vdev_device_name(vdev); + if (name == NULL) + return -EINVAL; + + dev = rte_cryptodev_pmd_create(name, &vdev->device, &init_params); + if (dev == NULL) { + UADK_LOG(ERR, "driver %s: create failed", init_params.name); + return -ENODEV; + } + + dev->dev_ops = &uadk_crypto_pmd_ops; + dev->driver_id = uadk_cryptodev_driver_id; + dev->dequeue_burst = NULL; + dev->enqueue_burst = NULL; + dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED; + priv = dev->data->dev_private; + priv->version = version; + + rte_cryptodev_pmd_probing_finish(dev); + + return 0; +} + +static int +uadk_cryptodev_remove(struct rte_vdev_device *vdev) +{ + struct rte_cryptodev *cryptodev; + const char *name; + + name = rte_vdev_device_name(vdev); + if (name == NULL) + return -EINVAL; + + cryptodev = rte_cryptodev_pmd_get_named_dev(name); + if (cryptodev == NULL) + return -ENODEV; + + return rte_cryptodev_pmd_destroy(cryptodev); +} + +static struct rte_vdev_driver uadk_crypto_pmd = { + .probe = uadk_cryptodev_probe, + .remove = uadk_cryptodev_remove, +}; + +static struct cryptodev_driver uadk_crypto_drv; + +#define UADK_CRYPTO_DRIVER_NAME crypto_uadk +RTE_PMD_REGISTER_VDEV(UADK_CRYPTO_DRIVER_NAME, uadk_crypto_pmd); +RTE_PMD_REGISTER_CRYPTO_DRIVER(uadk_crypto_drv, uadk_crypto_pmd.driver, + uadk_cryptodev_driver_id); +RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO); diff --git a/drivers/crypto/uadk/uadk_crypto_pmd_private.h b/drivers/crypto/uadk/uadk_crypto_pmd_private.h new file mode 100644 index 0000000000..c4090f6119 --- /dev/null +++ b/drivers/crypto/uadk/uadk_crypto_pmd_private.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved. + * Copyright 2022-2023 Linaro ltd. + */ + +#ifndef _UADK_CRYPTO_PMD_PRIVATE_H_ +#define _UADK_CRYPTO_PMD_PRIVATE_H_ + +enum uadk_crypto_version { + UADK_CRYPTO_V2, + UADK_CRYPTO_V3, +}; + +struct uadk_crypto_priv { + enum uadk_crypto_version version; +} __rte_cache_aligned; + +extern int uadk_crypto_logtype; + +#define UADK_LOG(level, fmt, ...) \ + rte_log(RTE_LOG_ ## level, uadk_crypto_logtype, \ + "%s() line %u: " fmt "\n", __func__, __LINE__, \ + ## __VA_ARGS__) + +#endif /* _UADK_CRYPTO_PMD_PRIVATE_H_ */ diff --git a/drivers/crypto/uadk/version.map b/drivers/crypto/uadk/version.map new file mode 100644 index 0000000000..78c3585d7c --- /dev/null +++ b/drivers/crypto/uadk/version.map @@ -0,0 +1,3 @@ +DPDK_23 { + local: *; +};

-- 2.25.1

Zhangfei Gao

11:25 a.m.

New subject: [PATCH v7 2/6] crypto/uadk: support basic operations

Support the basic dev control operations: configure, close, start, stop and get info, as well as queue pairs operations.

Signed-off-by: Zhangfei Gao zhangfei.gao@linaro.org --- drivers/crypto/uadk/uadk_crypto_pmd.c | 194 +++++++++++++++++- drivers/crypto/uadk/uadk_crypto_pmd_private.h | 19 ++ 2 files changed, 204 insertions(+), 9 deletions(-)

diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c index 34df3ccbb9..b383029a45 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd.c +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -17,16 +17,192 @@

static uint8_t uadk_cryptodev_driver_id;

+static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = { + /* End of capabilities */ + RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() +}; + +/* Configure device */ +static int +uadk_crypto_pmd_config(struct rte_cryptodev *dev __rte_unused, + struct rte_cryptodev_config *config __rte_unused) +{ + return 0; +} + +/* Start device */ +static int +uadk_crypto_pmd_start(struct rte_cryptodev *dev __rte_unused) +{ + return 0; +} + +/* Stop device */ +static void +uadk_crypto_pmd_stop(struct rte_cryptodev *dev __rte_unused) +{ +} + +/* Close device */ +static int +uadk_crypto_pmd_close(struct rte_cryptodev *dev __rte_unused) +{ + return 0; +} + +/* Get device statistics */ +static void +uadk_crypto_pmd_stats_get(struct rte_cryptodev *dev, + struct rte_cryptodev_stats *stats) +{ + int qp_id; + + for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) { + struct uadk_qp *qp = dev->data->queue_pairs[qp_id]; + + stats->enqueued_count += qp->qp_stats.enqueued_count; + stats->dequeued_count += qp->qp_stats.dequeued_count; + stats->enqueue_err_count += qp->qp_stats.enqueue_err_count; + stats->dequeue_err_count += qp->qp_stats.dequeue_err_count; + } +} + +/* Reset device statistics */ +static void +uadk_crypto_pmd_stats_reset(struct rte_cryptodev *dev __rte_unused) +{ + int qp_id; + + for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) { + struct uadk_qp *qp = dev->data->queue_pairs[qp_id]; + + memset(&qp->qp_stats, 0, sizeof(qp->qp_stats)); + } +} + +/* Get device info */ +static void +uadk_crypto_pmd_info_get(struct rte_cryptodev *dev, + struct rte_cryptodev_info *dev_info) +{ + struct uadk_crypto_priv *priv = dev->data->dev_private; + + if (dev_info != NULL) { + dev_info->driver_id = dev->driver_id; + dev_info->driver_name = dev->device->driver->name; + dev_info->max_nb_queue_pairs = 128; + /* No limit of number of sessions */ + dev_info->sym.max_nb_sessions = 0; + dev_info->feature_flags = dev->feature_flags; + + if (priv->version == UADK_CRYPTO_V2) + dev_info->capabilities = uadk_crypto_v2_capabilities; + } +} + +/* Release queue pair */ +static int +uadk_crypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id) +{ + struct uadk_qp *qp = dev->data->queue_pairs[qp_id]; + + if (qp) { + rte_ring_free(qp->processed_pkts); + rte_free(qp); + dev->data->queue_pairs[qp_id] = NULL; + } + + return 0; +} + +/* set a unique name for the queue pair based on its name, dev_id and qp_id */ +static int +uadk_pmd_qp_set_unique_name(struct rte_cryptodev *dev, + struct uadk_qp *qp) +{ + unsigned int n = snprintf(qp->name, sizeof(qp->name), + "uadk_crypto_pmd_%u_qp_%u", + dev->data->dev_id, qp->id); + + if (n >= sizeof(qp->name)) + return -EINVAL; + + return 0; +} + +/* Create a ring to place process packets on */ +static struct rte_ring * +uadk_pmd_qp_create_processed_pkts_ring(struct uadk_qp *qp, + unsigned int ring_size, int socket_id) +{ + struct rte_ring *r = qp->processed_pkts; + + if (r) { + if (rte_ring_get_size(r) >= ring_size) { + UADK_LOG(INFO, "Reusing existing ring %s for processed packets", + qp->name); + return r; + } + + UADK_LOG(ERR, "Unable to reuse existing ring %s for processed packets", + qp->name); + return NULL; + } + + return rte_ring_create(qp->name, ring_size, socket_id, + RING_F_EXACT_SZ); +} + +static int +uadk_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id, + const struct rte_cryptodev_qp_conf *qp_conf, + int socket_id) +{ + struct uadk_qp *qp; + + /* Free memory prior to re-allocation if needed. */ + if (dev->data->queue_pairs[qp_id] != NULL) + uadk_crypto_pmd_qp_release(dev, qp_id); + + /* Allocate the queue pair data structure. */ + qp = rte_zmalloc_socket("uadk PMD Queue Pair", sizeof(*qp), + RTE_CACHE_LINE_SIZE, socket_id); + if (qp == NULL) + return (-ENOMEM); + + qp->id = qp_id; + dev->data->queue_pairs[qp_id] = qp; + + if (uadk_pmd_qp_set_unique_name(dev, qp)) + goto qp_setup_cleanup; + + qp->processed_pkts = uadk_pmd_qp_create_processed_pkts_ring(qp, + qp_conf->nb_descriptors, socket_id); + if (qp->processed_pkts == NULL) + goto qp_setup_cleanup; + + memset(&qp->qp_stats, 0, sizeof(qp->qp_stats)); + + return 0; + +qp_setup_cleanup: + if (qp) { + rte_free(qp); + qp = NULL; + } + return -EINVAL; +} + static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { - .dev_configure = NULL, - .dev_start = NULL, - .dev_stop = NULL, - .dev_close = NULL, - .stats_get = NULL, - .stats_reset = NULL, - .dev_infos_get = NULL, - .queue_pair_setup = NULL, - .queue_pair_release = NULL, + .dev_configure = uadk_crypto_pmd_config, + .dev_start = uadk_crypto_pmd_start, + .dev_stop = uadk_crypto_pmd_stop, + .dev_close = uadk_crypto_pmd_close, + .stats_get = uadk_crypto_pmd_stats_get, + .stats_reset = uadk_crypto_pmd_stats_reset, + .dev_infos_get = uadk_crypto_pmd_info_get, + .queue_pair_setup = uadk_crypto_pmd_qp_setup, + .queue_pair_release = uadk_crypto_pmd_qp_release, .sym_session_get_size = NULL, .sym_session_configure = NULL, .sym_session_clear = NULL, diff --git a/drivers/crypto/uadk/uadk_crypto_pmd_private.h b/drivers/crypto/uadk/uadk_crypto_pmd_private.h index c4090f6119..3060583b54 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd_private.h +++ b/drivers/crypto/uadk/uadk_crypto_pmd_private.h @@ -6,6 +6,25 @@ #ifndef _UADK_CRYPTO_PMD_PRIVATE_H_ #define _UADK_CRYPTO_PMD_PRIVATE_H_

+/* Maximum length for digest (SHA-512 needs 64 bytes) */ +#define DIGEST_LENGTH_MAX 64 + +struct uadk_qp { + /* Ring for placing process packets */ + struct rte_ring *processed_pkts; + /* Queue pair statistics */ + struct rte_cryptodev_stats qp_stats; + /* Queue Pair Identifier */ + uint16_t id; + /* Unique Queue Pair Name */ + char name[RTE_CRYPTODEV_NAME_MAX_LEN]; + /* Buffer used to store the digest generated + * by the driver when verifying a digest provided + * by the user (using authentication verify operation) + */ + uint8_t temp_digest[DIGEST_LENGTH_MAX]; +} __rte_cache_aligned; + enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3,

-- 2.25.1

Zhangfei Gao

11:25 a.m.

New subject: [PATCH v7 3/6] crypto/uadk: support enqueue/dequeue operations

This commit adds the enqueue and dequeue operations.

Signed-off-by: Zhangfei Gao zhangfei.gao@linaro.org --- drivers/crypto/uadk/uadk_crypto_pmd.c | 53 ++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c index b383029a45..b889dac8b0 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd.c +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -208,6 +208,55 @@ static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { .sym_session_clear = NULL, };

+static uint16_t +uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, + uint16_t nb_ops) +{ + struct uadk_qp *qp = queue_pair; + struct rte_crypto_op *op; + uint16_t enqd = 0; + int i, ret; + + for (i = 0; i < nb_ops; i++) { + op = ops[i]; + op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED; + + if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED) + op->status = RTE_CRYPTO_OP_STATUS_SUCCESS; + + if (op->status != RTE_CRYPTO_OP_STATUS_ERROR) { + ret = rte_ring_enqueue(qp->processed_pkts, (void *)op); + if (ret < 0) + goto enqueue_err; + qp->qp_stats.enqueued_count++; + enqd++; + } else { + /* increment count if failed to enqueue op */ + qp->qp_stats.enqueue_err_count++; + } + } + + return enqd; + +enqueue_err: + qp->qp_stats.enqueue_err_count++; + return enqd; +} + +static uint16_t +uadk_crypto_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops, + uint16_t nb_ops) +{ + struct uadk_qp *qp = queue_pair; + unsigned int nb_dequeued; + + nb_dequeued = rte_ring_dequeue_burst(qp->processed_pkts, + (void **)ops, nb_ops, NULL); + qp->qp_stats.dequeued_count += nb_dequeued; + + return nb_dequeued; +} + static int uadk_cryptodev_probe(struct rte_vdev_device *vdev) { @@ -244,8 +293,8 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)

dev->dev_ops = &uadk_crypto_pmd_ops; dev->driver_id = uadk_cryptodev_driver_id; - dev->dequeue_burst = NULL; - dev->enqueue_burst = NULL; + dev->dequeue_burst = uadk_crypto_dequeue_burst; + dev->enqueue_burst = uadk_crypto_enqueue_burst; dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED; priv = dev->data->dev_private; priv->version = version;

-- 2.25.1

Zhangfei Gao

11:25 a.m.

New subject: [PATCH v7 4/6] crypto/uadk: support cipher algorithms

Add support for cipher algorithms, including AES_ECB, AES_CBC, AES_XTS, and DES_CBC mode.

Signed-off-by: Zhangfei Gao zhangfei.gao@linaro.org --- doc/guides/cryptodevs/features/uadk.ini | 10 + doc/guides/cryptodevs/uadk.rst | 6 + drivers/crypto/uadk/uadk_crypto_pmd.c | 303 +++++++++++++++++- drivers/crypto/uadk/uadk_crypto_pmd_private.h | 23 ++ 4 files changed, 337 insertions(+), 5 deletions(-)

diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini index df5ad40e3d..005e08ac8d 100644 --- a/doc/guides/cryptodevs/features/uadk.ini +++ b/doc/guides/cryptodevs/features/uadk.ini @@ -4,12 +4,22 @@ ; Refer to default.ini for the full list of available PMD features. ; [Features] +Symmetric crypto = Y HW Accelerated = Y

; ; Supported crypto algorithms of the 'uadk' crypto driver. ; [Cipher] +AES CBC (128) = Y +AES CBC (192) = Y +AES CBC (256) = Y +AES ECB (128) = Y +AES ECB (192) = Y +AES ECB (256) = Y +AES XTS (128) = Y +AES XTS (256) = Y +DES CBC = Y

; ; Supported authentication algorithms of the 'uadk' crypto driver. diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst index 2a0cb300e9..e0ca097961 100644 --- a/doc/guides/cryptodevs/uadk.rst +++ b/doc/guides/cryptodevs/uadk.rst @@ -24,6 +24,12 @@ Features

UADK crypto PMD has support for:

+Cipher algorithms: + +* ``RTE_CRYPTO_CIPHER_AES_ECB`` +* ``RTE_CRYPTO_CIPHER_AES_CBC`` +* ``RTE_CRYPTO_CIPHER_AES_XTS`` +* ``RTE_CRYPTO_CIPHER_DES_CBC``

Test steps ---------- diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c index b889dac8b0..f112a96033 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd.c +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -18,6 +18,86 @@ static uint8_t uadk_cryptodev_driver_id;

static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = { + { /* AES ECB */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, + {.cipher = { + .algo = RTE_CRYPTO_CIPHER_AES_ECB, + .block_size = 16, + .key_size = { + .min = 16, + .max = 32, + .increment = 8 + }, + .iv_size = { + .min = 0, + .max = 0, + .increment = 0 + } + }, } + }, } + }, + { /* AES CBC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, + {.cipher = { + .algo = RTE_CRYPTO_CIPHER_AES_CBC, + .block_size = 16, + .key_size = { + .min = 16, + .max = 32, + .increment = 8 + }, + .iv_size = { + .min = 16, + .max = 16, + .increment = 0 + } + }, } + }, } + }, + { /* AES XTS */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, + {.cipher = { + .algo = RTE_CRYPTO_CIPHER_AES_XTS, + .block_size = 1, + .key_size = { + .min = 32, + .max = 64, + .increment = 32 + }, + .iv_size = { + .min = 0, + .max = 0, + .increment = 0 + } + }, } + }, } + }, + { /* DES CBC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, + {.cipher = { + .algo = RTE_CRYPTO_CIPHER_DES_CBC, + .block_size = 8, + .key_size = { + .min = 8, + .max = 8, + .increment = 0 + }, + .iv_size = { + .min = 8, + .max = 8, + .increment = 0 + } + }, } + }, } + }, /* End of capabilities */ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; @@ -45,8 +125,15 @@ uadk_crypto_pmd_stop(struct rte_cryptodev *dev __rte_unused)

/* Close device */ static int -uadk_crypto_pmd_close(struct rte_cryptodev *dev __rte_unused) +uadk_crypto_pmd_close(struct rte_cryptodev *dev) { + struct uadk_crypto_priv *priv = dev->data->dev_private; + + if (priv->env_cipher_init) { + wd_cipher_env_uninit(); + priv->env_cipher_init = false; + } + return 0; }

@@ -193,6 +280,159 @@ uadk_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id, return -EINVAL; }

+static unsigned int +uadk_crypto_sym_session_get_size(struct rte_cryptodev *dev __rte_unused) +{ + return sizeof(struct uadk_crypto_session); +} + +static enum uadk_chain_order +uadk_get_chain_order(const struct rte_crypto_sym_xform *xform) +{ + enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED; + + if (xform != NULL) { + if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) { + if (xform->next == NULL) + res = UADK_CHAIN_ONLY_CIPHER; + } + } + + return res; +} + +static int +uadk_set_session_cipher_parameters(struct rte_cryptodev *dev, + struct uadk_crypto_session *sess, + struct rte_crypto_sym_xform *xform) +{ + struct uadk_crypto_priv *priv = dev->data->dev_private; + struct rte_crypto_cipher_xform *cipher = &xform->cipher; + struct wd_cipher_sess_setup setup = {0}; + struct sched_params params = {0}; + int ret; + + if (!priv->env_cipher_init) { + ret = wd_cipher_env_init(NULL); + if (ret < 0) + return -EINVAL; + priv->env_cipher_init = true; + } + + sess->cipher.direction = cipher->op; + sess->iv.offset = cipher->iv.offset; + sess->iv.length = cipher->iv.length; + + switch (cipher->algo) { + /* Cover supported cipher algorithms */ + case RTE_CRYPTO_CIPHER_AES_CTR: + setup.alg = WD_CIPHER_AES; + setup.mode = WD_CIPHER_CTR; + sess->cipher.req.out_bytes = 64; + break; + case RTE_CRYPTO_CIPHER_AES_ECB: + setup.alg = WD_CIPHER_AES; + setup.mode = WD_CIPHER_ECB; + sess->cipher.req.out_bytes = 16; + break; + case RTE_CRYPTO_CIPHER_AES_CBC: + setup.alg = WD_CIPHER_AES; + setup.mode = WD_CIPHER_CBC; + if (cipher->key.length == 16) + sess->cipher.req.out_bytes = 16; + else + sess->cipher.req.out_bytes = 64; + break; + case RTE_CRYPTO_CIPHER_AES_XTS: + setup.alg = WD_CIPHER_AES; + setup.mode = WD_CIPHER_XTS; + if (cipher->key.length == 16) + sess->cipher.req.out_bytes = 32; + else + sess->cipher.req.out_bytes = 512; + break; + default: + ret = -ENOTSUP; + goto env_uninit; + } + + params.numa_id = -1; /* choose nearby numa node */ + setup.sched_param = &params; + sess->handle_cipher = wd_cipher_alloc_sess(&setup); + if (!sess->handle_cipher) { + UADK_LOG(ERR, "uadk failed to alloc session!\n"); + ret = -EINVAL; + goto env_uninit; + } + + ret = wd_cipher_set_key(sess->handle_cipher, cipher->key.data, cipher->key.length); + if (ret) { + wd_cipher_free_sess(sess->handle_cipher); + UADK_LOG(ERR, "uadk failed to set key!\n"); + ret = -EINVAL; + goto env_uninit; + } + + return 0; + +env_uninit: + wd_cipher_env_uninit(); + priv->env_cipher_init = false; + return ret; +} + +static int +uadk_crypto_sym_session_configure(struct rte_cryptodev *dev, + struct rte_crypto_sym_xform *xform, + struct rte_cryptodev_sym_session *session) +{ + struct rte_crypto_sym_xform *cipher_xform = NULL; + struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session); + int ret; + + if (unlikely(!sess)) { + UADK_LOG(ERR, "Session not available"); + return -EINVAL; + } + + sess->chain_order = uadk_get_chain_order(xform); + switch (sess->chain_order) { + case UADK_CHAIN_ONLY_CIPHER: + cipher_xform = xform; + break; + default: + return -ENOTSUP; + } + + if (cipher_xform) { + ret = uadk_set_session_cipher_parameters(dev, sess, cipher_xform); + if (ret != 0) { + UADK_LOG(ERR, + "Invalid/unsupported cipher parameters"); + return ret; + } + } + + return 0; +} + +static void +uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused, + struct rte_cryptodev_sym_session *session) +{ + struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session); + + if (unlikely(sess == NULL)) { + UADK_LOG(ERR, "Session not available"); + return; + } + + if (sess->handle_cipher) { + wd_cipher_free_sess(sess->handle_cipher); + sess->handle_cipher = 0; + } +} + static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { .dev_configure = uadk_crypto_pmd_config, .dev_start = uadk_crypto_pmd_start, @@ -203,16 +443,51 @@ static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { .dev_infos_get = uadk_crypto_pmd_info_get, .queue_pair_setup = uadk_crypto_pmd_qp_setup, .queue_pair_release = uadk_crypto_pmd_qp_release, - .sym_session_get_size = NULL, - .sym_session_configure = NULL, - .sym_session_clear = NULL, + .sym_session_get_size = uadk_crypto_sym_session_get_size, + .sym_session_configure = uadk_crypto_sym_session_configure, + .sym_session_clear = uadk_crypto_sym_session_clear, };

+static void +uadk_process_cipher_op(struct rte_crypto_op *op, + struct uadk_crypto_session *sess, + struct rte_mbuf *msrc, struct rte_mbuf *mdst) +{ + uint32_t off = op->sym->cipher.data.offset; + int ret; + + if (!sess) { + op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS; + return; + } + + sess->cipher.req.src = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off); + sess->cipher.req.in_bytes = op->sym->cipher.data.length; + sess->cipher.req.dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *, off); + sess->cipher.req.out_buf_bytes = sess->cipher.req.in_bytes; + sess->cipher.req.iv_bytes = sess->iv.length; + sess->cipher.req.iv = rte_crypto_op_ctod_offset(op, uint8_t *, + sess->iv.offset); + if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) + sess->cipher.req.op_type = WD_CIPHER_ENCRYPTION; + else + sess->cipher.req.op_type = WD_CIPHER_DECRYPTION; + + do { + ret = wd_do_cipher_sync(sess->handle_cipher, &sess->cipher.req); + } while (ret == -WD_EBUSY); + + if (ret) + op->status = RTE_CRYPTO_OP_STATUS_ERROR; +} + static uint16_t uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, uint16_t nb_ops) { struct uadk_qp *qp = queue_pair; + struct uadk_crypto_session *sess = NULL; + struct rte_mbuf *msrc, *mdst; struct rte_crypto_op *op; uint16_t enqd = 0; int i, ret; @@ -220,6 +495,23 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, for (i = 0; i < nb_ops; i++) { op = ops[i]; op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED; + msrc = op->sym->m_src; + mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src; + + if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { + if (likely(op->sym->session != NULL)) + sess = CRYPTODEV_GET_SYM_SESS_PRIV( + op->sym->session); + } + + switch (sess->chain_order) { + case UADK_CHAIN_ONLY_CIPHER: + uadk_process_cipher_op(op, sess, msrc, mdst); + break; + default: + op->status = RTE_CRYPTO_OP_STATUS_ERROR; + break; + }

if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED) op->status = RTE_CRYPTO_OP_STATUS_SUCCESS; @@ -295,7 +587,8 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev) dev->driver_id = uadk_cryptodev_driver_id; dev->dequeue_burst = uadk_crypto_dequeue_burst; dev->enqueue_burst = uadk_crypto_enqueue_burst; - dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED; + dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED | + RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO; priv = dev->data->dev_private; priv->version = version;

diff --git a/drivers/crypto/uadk/uadk_crypto_pmd_private.h b/drivers/crypto/uadk/uadk_crypto_pmd_private.h index 3060583b54..e981420cef 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd_private.h +++ b/drivers/crypto/uadk/uadk_crypto_pmd_private.h @@ -25,12 +25,35 @@ struct uadk_qp { uint8_t temp_digest[DIGEST_LENGTH_MAX]; } __rte_cache_aligned;

+enum uadk_chain_order { + UADK_CHAIN_ONLY_CIPHER, + UADK_CHAIN_NOT_SUPPORTED +}; + +struct uadk_crypto_session { + handle_t handle_cipher; + enum uadk_chain_order chain_order; + + /* IV parameters */ + struct { + uint16_t length; + uint16_t offset; + } iv; + + /* Cipher Parameters */ + struct { + enum rte_crypto_cipher_operation direction; + struct wd_cipher_req req; + } cipher; +} __rte_cache_aligned; + enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, };

struct uadk_crypto_priv { + bool env_cipher_init; enum uadk_crypto_version version; } __rte_cache_aligned;

-- 2.25.1

Zhangfei Gao

11:25 a.m.

New subject: [PATCH v7 5/6] crypto/uadk: support auth algorithms

Add support for MD5, SHA1, SHA224, SHA256, SHA384, SHA512 Authentication algorithms with and without HMAC.

Signed-off-by: Zhangfei Gao zhangfei.gao@linaro.org --- doc/guides/cryptodevs/features/uadk.ini | 12 + doc/guides/cryptodevs/uadk.rst | 15 + drivers/crypto/uadk/uadk_crypto_pmd.c | 453 ++++++++++++++++++ drivers/crypto/uadk/uadk_crypto_pmd_private.h | 12 + 4 files changed, 492 insertions(+)

diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini index 005e08ac8d..2e8a37a2b3 100644 --- a/doc/guides/cryptodevs/features/uadk.ini +++ b/doc/guides/cryptodevs/features/uadk.ini @@ -25,6 +25,18 @@ DES CBC = Y ; Supported authentication algorithms of the 'uadk' crypto driver. ; [Auth] +MD5 = Y +MD5 HMAC = Y +SHA1 = Y +SHA1 HMAC = Y +SHA224 = Y +SHA224 HMAC = Y +SHA256 = Y +SHA256 HMAC = Y +SHA384 = Y +SHA384 HMAC = Y +SHA512 = Y +SHA512 HMAC = Y

; ; Supported AEAD algorithms of the 'uadk' crypto driver. diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst index e0ca097961..19bb461e72 100644 --- a/doc/guides/cryptodevs/uadk.rst +++ b/doc/guides/cryptodevs/uadk.rst @@ -31,6 +31,21 @@ Cipher algorithms: * ``RTE_CRYPTO_CIPHER_AES_XTS`` * ``RTE_CRYPTO_CIPHER_DES_CBC``

+Hash algorithms: + +* ``RTE_CRYPTO_AUTH_MD5`` +* ``RTE_CRYPTO_AUTH_MD5_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA1`` +* ``RTE_CRYPTO_AUTH_SHA1_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA224`` +* ``RTE_CRYPTO_AUTH_SHA224_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA256`` +* ``RTE_CRYPTO_AUTH_SHA256_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA384`` +* ``RTE_CRYPTO_AUTH_SHA384_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA512`` +* ``RTE_CRYPTO_AUTH_SHA512_HMAC`` + Test steps ----------

diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c index f112a96033..4f729e0f07 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd.c +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -18,6 +18,258 @@ static uint8_t uadk_cryptodev_driver_id;

static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = { + { /* MD5 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_MD5_HMAC, + .block_size = 64, + .key_size = { + .min = 1, + .max = 64, + .increment = 1 + }, + .digest_size = { + .min = 1, + .max = 16, + .increment = 1 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* MD5 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_MD5, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 16, + .max = 16, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA1 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA1_HMAC, + .block_size = 64, + .key_size = { + .min = 1, + .max = 64, + .increment = 1 + }, + .digest_size = { + .min = 1, + .max = 20, + .increment = 1 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA1 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA1, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 20, + .max = 20, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA224 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA224_HMAC, + .block_size = 64, + .key_size = { + .min = 1, + .max = 64, + .increment = 1 + }, + .digest_size = { + .min = 1, + .max = 28, + .increment = 1 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA224 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA224, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 1, + .max = 28, + .increment = 1 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA256 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA256_HMAC, + .block_size = 64, + .key_size = { + .min = 1, + .max = 64, + .increment = 1 + }, + .digest_size = { + .min = 1, + .max = 32, + .increment = 1 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA256 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA256, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 32, + .max = 32, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA384 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA384_HMAC, + .block_size = 128, + .key_size = { + .min = 1, + .max = 128, + .increment = 1 + }, + .digest_size = { + .min = 1, + .max = 48, + .increment = 1 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA384 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA384, + .block_size = 128, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 48, + .max = 48, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA512 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA512_HMAC, + .block_size = 128, + .key_size = { + .min = 1, + .max = 128, + .increment = 1 + }, + .digest_size = { + .min = 1, + .max = 64, + .increment = 1 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA512 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA512, + .block_size = 128, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 64, + .max = 64, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, { /* AES ECB */ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, {.sym = { @@ -134,6 +386,11 @@ uadk_crypto_pmd_close(struct rte_cryptodev *dev) priv->env_cipher_init = false; }

+ if (priv->env_auth_init) { + wd_digest_env_uninit(); + priv->env_auth_init = false; + } + return 0; }

@@ -292,9 +549,19 @@ uadk_get_chain_order(const struct rte_crypto_sym_xform *xform) enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED;

if (xform != NULL) { + if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) { + if (xform->next == NULL) + res = UADK_CHAIN_ONLY_AUTH; + else if (xform->next->type == + RTE_CRYPTO_SYM_XFORM_CIPHER) + res = UADK_CHAIN_AUTH_CIPHER; + } + if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) { if (xform->next == NULL) res = UADK_CHAIN_ONLY_CIPHER; + else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) + res = UADK_CHAIN_CIPHER_AUTH; } }

@@ -381,12 +648,119 @@ uadk_set_session_cipher_parameters(struct rte_cryptodev *dev, return ret; }

+/* Set session auth parameters */ +static int +uadk_set_session_auth_parameters(struct rte_cryptodev *dev, + struct uadk_crypto_session *sess, + struct rte_crypto_sym_xform *xform) +{ + struct uadk_crypto_priv *priv = dev->data->dev_private; + struct wd_digest_sess_setup setup = {0}; + struct sched_params params = {0}; + int ret; + + if (!priv->env_auth_init) { + ret = wd_digest_env_init(NULL); + if (ret < 0) + return -EINVAL; + priv->env_auth_init = true; + } + + sess->auth.operation = xform->auth.op; + sess->auth.digest_length = xform->auth.digest_length; + + switch (xform->auth.algo) { + case RTE_CRYPTO_AUTH_MD5: + case RTE_CRYPTO_AUTH_MD5_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_MD5) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_MD5; + sess->auth.req.out_buf_bytes = 16; + sess->auth.req.out_bytes = 16; + break; + case RTE_CRYPTO_AUTH_SHA1: + case RTE_CRYPTO_AUTH_SHA1_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA1) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA1; + sess->auth.req.out_buf_bytes = 20; + sess->auth.req.out_bytes = 20; + break; + case RTE_CRYPTO_AUTH_SHA224: + case RTE_CRYPTO_AUTH_SHA224_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA224) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA224; + sess->auth.req.out_buf_bytes = 28; + sess->auth.req.out_bytes = 28; + break; + case RTE_CRYPTO_AUTH_SHA256: + case RTE_CRYPTO_AUTH_SHA256_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA256) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA256; + sess->auth.req.out_buf_bytes = 32; + sess->auth.req.out_bytes = 32; + break; + case RTE_CRYPTO_AUTH_SHA384: + case RTE_CRYPTO_AUTH_SHA384_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA384) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA384; + sess->auth.req.out_buf_bytes = 48; + sess->auth.req.out_bytes = 48; + break; + case RTE_CRYPTO_AUTH_SHA512: + case RTE_CRYPTO_AUTH_SHA512_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA512) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA512; + sess->auth.req.out_buf_bytes = 64; + sess->auth.req.out_bytes = 64; + break; + default: + ret = -ENOTSUP; + goto env_uninit; + } + + params.numa_id = -1; /* choose nearby numa node */ + setup.sched_param = &params; + sess->handle_digest = wd_digest_alloc_sess(&setup); + if (!sess->handle_digest) { + UADK_LOG(ERR, "uadk failed to alloc session!\n"); + ret = -EINVAL; + goto env_uninit; + } + + /* if mode is HMAC, should set key */ + if (setup.mode == WD_DIGEST_HMAC) { + ret = wd_digest_set_key(sess->handle_digest, + xform->auth.key.data, + xform->auth.key.length); + if (ret) { + UADK_LOG(ERR, "uadk failed to alloc session!\n"); + wd_digest_free_sess(sess->handle_digest); + sess->handle_digest = 0; + ret = -EINVAL; + goto env_uninit; + } + } + + return 0; + +env_uninit: + wd_digest_env_uninit(); + priv->env_auth_init = false; + return ret; +} + static int uadk_crypto_sym_session_configure(struct rte_cryptodev *dev, struct rte_crypto_sym_xform *xform, struct rte_cryptodev_sym_session *session) { struct rte_crypto_sym_xform *cipher_xform = NULL; + struct rte_crypto_sym_xform *auth_xform = NULL; struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session); int ret;

@@ -400,6 +774,17 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev, case UADK_CHAIN_ONLY_CIPHER: cipher_xform = xform; break; + case UADK_CHAIN_ONLY_AUTH: + auth_xform = xform; + break; + case UADK_CHAIN_CIPHER_AUTH: + cipher_xform = xform; + auth_xform = xform->next; + break; + case UADK_CHAIN_AUTH_CIPHER: + auth_xform = xform; + cipher_xform = xform->next; + break; default: return -ENOTSUP; } @@ -413,6 +798,15 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev, } }

+ if (auth_xform) { + ret = uadk_set_session_auth_parameters(dev, sess, auth_xform); + if (ret != 0) { + UADK_LOG(ERR, + "Invalid/unsupported auth parameters"); + return ret; + } + } + return 0; }

@@ -431,6 +825,11 @@ uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused, wd_cipher_free_sess(sess->handle_cipher); sess->handle_cipher = 0; } + + if (sess->handle_digest) { + wd_digest_free_sess(sess->handle_digest); + sess->handle_digest = 0; + } }

static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { @@ -481,6 +880,49 @@ uadk_process_cipher_op(struct rte_crypto_op *op, op->status = RTE_CRYPTO_OP_STATUS_ERROR; }

+static void +uadk_process_auth_op(struct uadk_qp *qp, struct rte_crypto_op *op, + struct uadk_crypto_session *sess, + struct rte_mbuf *msrc, struct rte_mbuf *mdst) +{ + uint32_t srclen = op->sym->auth.data.length; + uint32_t off = op->sym->auth.data.offset; + uint8_t *dst = qp->temp_digest; + int ret; + + if (!sess) { + op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS; + return; + } + + sess->auth.req.in = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off); + sess->auth.req.in_bytes = srclen; + sess->auth.req.out = dst; + + do { + ret = wd_do_digest_sync(sess->handle_digest, &sess->auth.req); + } while (ret == -WD_EBUSY); + + if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) { + if (memcmp(dst, op->sym->auth.digest.data, + sess->auth.digest_length) != 0) { + op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED; + } + } else { + uint8_t *auth_dst; + + auth_dst = op->sym->auth.digest.data; + if (auth_dst == NULL) + auth_dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *, + op->sym->auth.data.offset + + op->sym->auth.data.length); + memcpy(auth_dst, dst, sess->auth.digest_length); + } + + if (ret) + op->status = RTE_CRYPTO_OP_STATUS_ERROR; +} + static uint16_t uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, uint16_t nb_ops) @@ -508,6 +950,17 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, case UADK_CHAIN_ONLY_CIPHER: uadk_process_cipher_op(op, sess, msrc, mdst); break; + case UADK_CHAIN_ONLY_AUTH: + uadk_process_auth_op(qp, op, sess, msrc, mdst); + break; + case UADK_CHAIN_CIPHER_AUTH: + uadk_process_cipher_op(op, sess, msrc, mdst); + uadk_process_auth_op(qp, op, sess, mdst, mdst); + break; + case UADK_CHAIN_AUTH_CIPHER: + uadk_process_auth_op(qp, op, sess, msrc, mdst); + uadk_process_cipher_op(op, sess, msrc, mdst); + break; default: op->status = RTE_CRYPTO_OP_STATUS_ERROR; break; diff --git a/drivers/crypto/uadk/uadk_crypto_pmd_private.h b/drivers/crypto/uadk/uadk_crypto_pmd_private.h index e981420cef..9075f0f058 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd_private.h +++ b/drivers/crypto/uadk/uadk_crypto_pmd_private.h @@ -27,11 +27,15 @@ struct uadk_qp {

enum uadk_chain_order { UADK_CHAIN_ONLY_CIPHER, + UADK_CHAIN_ONLY_AUTH, + UADK_CHAIN_CIPHER_AUTH, + UADK_CHAIN_AUTH_CIPHER, UADK_CHAIN_NOT_SUPPORTED };

struct uadk_crypto_session { handle_t handle_cipher; + handle_t handle_digest; enum uadk_chain_order chain_order;

/* IV parameters */ @@ -45,6 +49,13 @@ struct uadk_crypto_session { enum rte_crypto_cipher_operation direction; struct wd_cipher_req req; } cipher; + + /* Authentication Parameters */ + struct { + struct wd_digest_req req; + enum rte_crypto_auth_operation operation; + uint16_t digest_length; + } auth; } __rte_cache_aligned;

enum uadk_crypto_version { @@ -54,6 +65,7 @@ enum uadk_crypto_version {

struct uadk_crypto_priv { bool env_cipher_init; + bool env_auth_init; enum uadk_crypto_version version; } __rte_cache_aligned;

-- 2.25.1

Zhangfei Gao

11:25 a.m.

New subject: [PATCH v7 6/6] test/crypto: support uadk PMD

Example: sudo dpdk-test --vdev=crypto_uadk --log-level=6 RTE>>cryptodev_uadk_autotest RTE>>quit

Signed-off-by: Zhangfei Gao zhangfei.gao@linaro.org --- app/test/meson.build | 1 + app/test/test_cryptodev.c | 7 +++++++ app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/uadk.rst | 3 +++ 4 files changed, 12 insertions(+)

diff --git a/app/test/meson.build b/app/test/meson.build index 396b133959..f34d19e3c3 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -312,6 +312,7 @@ driver_test_names = [ 'cryptodev_sw_mvsam_autotest', 'cryptodev_sw_snow3g_autotest', 'cryptodev_sw_zuc_autotest', + 'cryptodev_uadk_autotest', 'dmadev_autotest', 'rawdev_autotest', ] diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index 43fcef7e73..101a68fb70 100644 --- a/app/test/test_cryptodev.c +++ b/app/test/test_cryptodev.c @@ -16538,6 +16538,12 @@ test_cryptodev_qat(void) return run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); }

+static int +test_cryptodev_uadk(void) +{ + return run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_UADK_PMD)); +} + static int test_cryptodev_virtio(void) { @@ -16881,6 +16887,7 @@ REGISTER_TEST_COMMAND(cryptodev_sw_mvsam_autotest, test_cryptodev_mrvl); REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest, test_cryptodev_dpaa2_sec); REGISTER_TEST_COMMAND(cryptodev_dpaa_sec_autotest, test_cryptodev_dpaa_sec); REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp); +REGISTER_TEST_COMMAND(cryptodev_uadk_autotest, test_cryptodev_uadk); REGISTER_TEST_COMMAND(cryptodev_virtio_autotest, test_cryptodev_virtio); REGISTER_TEST_COMMAND(cryptodev_octeontx_autotest, test_cryptodev_octeontx); REGISTER_TEST_COMMAND(cryptodev_caam_jr_autotest, test_cryptodev_caam_jr); diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h index 29a7d4db2b..abd795f54a 100644 --- a/app/test/test_cryptodev.h +++ b/app/test/test_cryptodev.h @@ -74,6 +74,7 @@ #define CRYPTODEV_NAME_CN9K_PMD crypto_cn9k #define CRYPTODEV_NAME_CN10K_PMD crypto_cn10k #define CRYPTODEV_NAME_MLX5_PMD crypto_mlx5 +#define CRYPTODEV_NAME_UADK_PMD crypto_uadk

enum cryptodev_api_test_type { diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst index 19bb461e72..c9508ecd9e 100644 --- a/doc/guides/cryptodevs/uadk.rst +++ b/doc/guides/cryptodevs/uadk.rst @@ -88,6 +88,9 @@ Test steps $ mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB

5. Run test app + $ sudo dpdk-test --vdev=crypto_uadk --log-level=6 + RTE>>cryptodev_uadk_autotest + RTE>>quit

[1] https://github.com/Linaro/uadk

-- 2.25.1

Akhil Goyal

6:53 p.m.

New subject: [EXT] [PATCH v7 0/6] crypto/uadk: introduce uadk crypto driver

...

Introduce a new crypto PMD for hardware accelerators based on UADK [1].

UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability.

[1] https://urldefense.proofpoint.com/v2/url?u=https- 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AwapMJzvfUDL49W9f mtmvIGZMarGUdjRSliBhG4tep6Uh5wN2zYrZRJ4JpbrVolg&s=MxSabEjMMkeRr0L Z7c1gSmaJmJ1_dIdJIKrst98pKzk&e=

Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit

Update in v7: 05: fix key_size of SHA384 HMAC

Update in v6: Akhil helped review the v5, and address all the comments from Akhil 01: add rel_notes info, update uadk.rst, put struct in header, etc. 02: move struct to header 04: move struct to header, remove RTE_CRYPTODEV_FF_SYM_SESSIONLESS 05: fixed key_size in HMAC mode 06: updated app/test/meson.build and uadk.rst in the mean time.

Update in v5 Patch 1 fix the build issue when uadk is installed to specific folder And update doc accordingly

Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device.

Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework".

Update in v3: Split patches according to Akhil's suggestions Please split the patches as below.

introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here.

define queue structs and setup/remove APIs

Add data path

implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc.

implement auth, add capabilities and documentation

test app changes.

Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, };

Update in v1, compared with rfc

Suggested from Akhil Goyal gakhil@marvell.com Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini

Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: support uadk PMD

MAINTAINERS | 6 + app/test/meson.build | 1 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 + doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 96 ++ doc/guides/rel_notes/release_22_11.rst | 6 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1081 +++++++++++++++++ drivers/crypto/uadk/uadk_crypto_pmd_private.h | 79 ++ drivers/crypto/uadk/version.map | 3 + 13 files changed, 1367 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd_private.h create mode 100644 drivers/crypto/uadk/version.map

Series Applied to dpdk-next-crypto Welcome to dpdk. Thanks.

Zhangfei Gao

28 Oct 28 Oct

9:02 a.m.

New subject: [EXT] [PATCH v7 0/6] crypto/uadk: introduce uadk crypto driver

On 2022/10/27 下午6:53, Akhil Goyal wrote:

...

...
Introduce a new crypto PMD for hardware accelerators based on UADK [1].

UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability.

[1] https://urldefense.proofpoint.com/v2/url?u=https- 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AwapMJzvfUDL49W9f mtmvIGZMarGUdjRSliBhG4tep6Uh5wN2zYrZRJ4JpbrVolg&s=MxSabEjMMkeRr0L Z7c1gSmaJmJ1_dIdJIKrst98pKzk&e=

Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit

Update in v7: 05: fix key_size of SHA384 HMAC

Update in v6: Akhil helped review the v5, and address all the comments from Akhil 01: add rel_notes info, update uadk.rst, put struct in header, etc. 02: move struct to header 04: move struct to header, remove RTE_CRYPTODEV_FF_SYM_SESSIONLESS 05: fixed key_size in HMAC mode 06: updated app/test/meson.build and uadk.rst in the mean time.

Update in v5 Patch 1 fix the build issue when uadk is installed to specific folder And update doc accordingly

Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device.

Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework".

Update in v3: Split patches according to Akhil's suggestions Please split the patches as below.

introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here.

define queue structs and setup/remove APIs

Add data path

implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc.

implement auth, add capabilities and documentation

test app changes.

Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, };

Update in v1, compared with rfc

Suggested from Akhil Goyal gakhil@marvell.com Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini

Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: support uadk PMD

MAINTAINERS | 6 + app/test/meson.build | 1 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 + doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 96 ++ doc/guides/rel_notes/release_22_11.rst | 6 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1081 +++++++++++++++++ drivers/crypto/uadk/uadk_crypto_pmd_private.h | 79 ++ drivers/crypto/uadk/version.map | 3 + 13 files changed, 1367 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd_private.h create mode 100644 drivers/crypto/uadk/version.map

Series Applied to dpdk-next-crypto Welcome to dpdk.

That's Great Thanks for your guidance and patience.

Originally, the UADK only consider ARM usage and need cross-compile on x86. With you guidance, now the UADK support pkg-config, and can build and install on both ARM and X86.

Thanks Akhil.

556

Age (days ago)

557

Last active (days ago)

acc@openeuler.org

8 comments

2 participants

tags (0)

participants (2)

Akhil Goyal
Zhangfei Gao